Caravan FWD L4-2.4L VIN X (1997)
5. Remove lower bolt attaching timing belt tensioner assembly to engine and remove tensioner.
INSTALLATION
1. Align timing belt tensioner assembly to engine and install lower mounting bolt but do not tighten. To properly align tensioner assembly - install
one of the engine bracket mounting bolts (M10) 5 to 7 turns into the tensioner's upper mounting location.
2. Torque the tensioner's lower mounting bolt to 61 Nm (45 ft. lbs.). Remove the upper bolt used for tensioner alignment.
3. Install the rear timing belt cover and fasteners.
4. Install the timing belt idler pulley and torque mounting bolt to 61 Nm (45 ft.lbs.).
5. Install the camshaft sprockets and torque bolts to 101 Nm (75 ft.lbs.).
6. Install the timing belt.
