Caravan FWD L4-2.4L VIN X (1997)
Control Assembly: Testing and Inspection
Failure Codes/Level Display
Wipe Button LED
Level 1 - Failure Code Values (Intermittent Wipe Button LED)
Fail Codes/Level are displayed using the REAR WIPER and INTERMITTENT LED's flashing in the sequence indicated below. The REAR WIPER
LED represents the Level and the INTERMITTENT LED represents the Value. After Calibration/Diagnostics is completed, the control will begin
flashing Level 1 codes. Depressing the WASH button will cycle to Level 2, depressing WASH again will cycle to Level 3. Each time the WASH button
is depressed will cycle to the next level. After Level 5 is reached, you will cycle back to Level 1. If the Control is a Heater Only you will only cycle from
Levels 1 to 3.
