dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Alignment|Page 1332 > < Front Alignment|Page 1330
Page 4
background image

2. Center steering wheel and lock in place using a steering wheel clamp.

CAUTION:  Do not twist front inner tie rod to steering gear rubber boots during front wheel Toe adjustment.

3. Loosen front inner to outer tie rod end jam nuts. Grasp inner tie rods at serrations and rotate inner tie rods of steering gear to set front Toe to the

preferred Toe specification. 

4. Tighten tie rod jam nuts to 75 Nm (55 ft. lbs.) torque.
5. Adjust steering gear to tie rod boots at tie rod.
6. Remove steering wheel clamp.

Front Alignment|Page 1332 > < Front Alignment|Page 1330