Caravan FWD V6-181 3.0L SOHC (1991)
5. Position piston ring end gaps as shown.
6. Position oil ring expander gap at least 45° from the side rail gaps but not on the piston pin center or on the thrust direction.
7. Connecting rod front mark 72 must always face forward, toward timing belt end.
8. Install the piston and connecting rod assembly into there respective bore from the cylinder block top.
CAUTION: Piston assemblies are not to be interchanged from bank to bank.
9. Check alignment marks made during disassembly and that bearing position notches new or used are on the same side as shown.
