Caravan FWD V6-201 3.3L (1992)
- A Diagnostic Trouble Code (DTC) is stored in memory.
- The MIL is illuminated [1].
- The vehicle enters "Limp-in Mode". SEE LIMP-IN OPERATION.
Note:
DTC's can be read using the Malfunction Indicator Lamp (MIL), (previously called the Check Engine Lamp), or a scan tool. SEE Testing
and Inspection.
[1] The MIL is not illuminated for every fault, always read DTC's before attempting to diagnose a driveablity or emission related problem.
INPUTS
Automatic Shutdown (ASD) Sense
Battery Voltage (B+) Sense
Brake Switch
Camshaft Sensor
Crankshaft Sensor
Coolant Temperature Sensor
Manifold Absolute Pressure (MAP) Sensor
Transmission Park/Neutral Switch (Automatic Transmission)
Heated Oxygen Sensor (HO2S)
SCI Receive
Speed Control System Controls
Throttle Position Sensor (TPS)
Vehicle Distance (Speed) Sensor (VSS)
OUTPUTS
Air-Conditioner Clutch Relay
Alternator Field
Idle Air Control (IAC) Motor
Automatic Shut Down (ASD) Relay
Check Engine Lamp (CEL)
Electronic EGR Transducer (EET)
Evaporative Emission Purge Control Solenoid Valve
Fuel Injector Pulse Width
Ignition Coil
Radiator Fan Relay
Diagnostic Connector
Speed Control (S/C) Servo Solenoids
Tachometer Output
+8 Volt Regulated Voltage for the Camshaft Position, Crankshaft
Position, and Vehicle Speed Sensors
+5 Volt Regulated Voltage for MAP and Throttle Position Sensors