dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Assembly, HVAC > < Front A/C Condenser|Page 7925
Page 1
background image

Condenser HVAC: Service and Repair
Rear A/C Auxiliary Condenser

NOTE:  If vehicle is equipped with rear heater and air conditioning, it will be equipped with an auxiliary condenser. The auxiliary condenser is mounted
on the primary condenser in front of the radiator. Both condensers must be removed as an assembly and then separated.

WARNING:  The refrigeration system must be completely empty before proceeding with this operation.

NOTE: Special effort must be used to keep all R-134a system components moisture free. Moisture in the oil is very difficult to remove and will cause a
reliability problem with the compressor.

REMOVAL

The condenser assembly must first be removed from vehicle. See: 

1. After condenser assembly removal, place on bench for disassembly.
2. Remove (1) bolt to liquid line on auxiliary condenser.

Auxiliary Condenser

3. Remove (4) attaching bolts and separate auxiliary from primary condenser.

INSTALLATION

1. Before installation, replace all 0-rings and gaskets. Coat all sealing surfaces with approved wax-free refrigerant oil. Then, reverse the above

procedures.

2. Evacuate and recharge system.

Control Assembly, HVAC > < Front A/C Condenser|Page 7925