dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

EGR Backpressure Transducer|Locations|Page 3939 > < EGR Backpressure Transducer|Locations|Page 3937
Page 2
background image

vacuum gauge. 

-

Heavy gloves should be worn. 

CAUTION:  Do not cover the tailpipe opening for an extended period of time as damage to components or overheating may result.

17. As temporary back-pressure is built, full manifold vacuum should be observed at the vacuum outlet fitting. 

-

Without back-pressure, and engine at approximately 2,000 rpm, the gauge reading will be low. 

-

This low reading is normal. 

-

At idle speed, the gauge reading will be erratic. 

-

This is also normal.

18. If full manifold vacuum is not present at the outlet fitting, but was present at the inlet fitting, replace the valve. 

NOTE:  The EGR valve, valve control and attaching hoses are serviced as one assembly.

EGR Backpressure Transducer|Locations|Page 3939 > < EGR Backpressure Transducer|Locations|Page 3937