dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Air Bag Disarming|Page 8200 > < Service Port HVAC|Locations|Page 8193
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Air Bag Disarming

Air Bag Disarming

WARNING:  The airbag system is a sensitive, complex electromechanical unit. Before attempting to diagnose or service any airbag system or
related steering wheel, steering column, or instrument panel components you must first disconnect and isolate the battery negative (ground)
cable. Then wait two minutes for the system capacitor to discharge before further system service. This is the only sure way to disable the airbag
system. 
Failure to do this could result in accidental air-bag deployment and possible personal injury
.

DISARMING

1. Place ignition switch in lock position.
2. Disconnect battery ground cable connector.
3. Wait at least ten minutes after disconnecting battery ground cable before performing any further repairs on vehicle. The SRS system is

designed to retain enough voltage to deploy air bag for a short time even after battery has been disconnected.

Air Bag Disarming|Page 8200 > < Service Port HVAC|Locations|Page 8193