Caravan FWD V6-201 3.3L VIN R MFI (1997)
Calibration/Cooldown Test LED's
NOTE: See chart for definition of flashing LED's. If no problems are found, the control functions normally.
CALIBRATION/DIAGNOSTICS TEST ENTRY
TO INITIATE TESTS:
^
Set Blower motor ON HIGH
^
Set Mode position to Panel
^
Open all A/C outlets
^
Set Temperature to Cold (Both slide pots if equipped)
^
Depress WASH and REAR WIPER button simultaneously for 5 Seconds (Until all LED's light)
RESULTS:
^
All LED's will turn on for 5 Seconds
^
Calibration Test is running when REAR WIPER and INTERMITTENT are alternately flashing. Cool-down test is running if A/C and RECIRC
are alternately flashing.
^
Acceptable result is REAR WIPER LED is the only LED flashing. Push Rear Wiper to exit.
^
After all tests have passed, Calibration Diagnostics and Cool-down can be run separately.
