Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Trunk / Liftgate Stop: Service and Repair
SLAM BUMPER
REMOVAL
REMOVAL - BODY SIDE
1. Open liftgate.
Fig. 8
2. Remove liftgate stop bumper body side attaching bolts (Fig. 8).
3. Remove liftgate stop bumper.
REMOVAL - LIFTGATE SIDE
1. Open liftgate.
2. Remove liftgate stop bumper liftgate side attaching rivets by drilling out old rivets.
3. Remove liftgate stop bumper.
INSTALLATION
INSTALLATION - BODY SIDE
1. Place liftgate stop bumper into position.
2. Install bolts attaching liftgate stop bumper to body side (Fig. 8).
3. Close liftgate.
INSTALLATION - LIFTGATE SIDE
1. Place liftgate stop bumper into position.
2. Install rivets attaching liftgate stop bumper to liftgate.
NOTE: Verify that chips or parts of drilled out rivet does not rattle in the liftgate. If there is rattling sound, detrim liftgate and retrieve debris.
3. Close liftgate.