dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Technical Service Bulletins|Service and Repair|Page 8441 > < PLG Module - Closes Liftgate But Will Not Open It|Page 8438
Page 1
background image

Antenna Mast: Service and Repair

REMOVAL

1. Remove glove box from instrument panel.

Antenna Cable

2. Disconnect antenna cable connector from extension cable.
3. Remove right kick trim panel.
4. Disengage rubber grommet insulator from door hinge pillar.
5. Pull antenna cable through hinge pillar into opening between door hinges.
6. Hoist and support vehicle on safety stands.
7. Remove front wheel.
8. Remove front wheelhouse splash shield. 

Antenna Mast

9. Remove antenna mast from antenna base.

Technical Service Bulletins|Service and Repair|Page 8441 > < PLG Module - Closes Liftgate But Will Not Open It|Page 8438