Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Power Seat Switch: Testing and Inspection
Memory Switch Test
1. Disconnect and isolate the battery negative cable.
2. Remove the driver side front door trim panel switch bezel. Using a small thin bladed pry tool, gently pry the switch bezel away from the door trim
panel.
3. Disconnect the memory switch wire harness connector from the memory switch.
Memory Switch Test
4. Use an ohmmeter to test the resistances of the memory switch in each switch position. See the Memory Switch Test chart. If OK, refer to Memory
System in the Diagnosis and Testing. If not OK, replace the faulty memory switch.
