Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
4. Remove the CAB from the HCU.
ASSEMBLY - ICU
1. Install the Controller Antilock Brake (CAB) on the Hydraulic Control Unit (HCU).
2. Install the 4 bolts mounting the CAB to the HCU. Tighten the CAB mounting bolts to a torque of 2 Nm (17 inch lbs.).
3. Plug the pump/motor wiring harness into the CAB.
4. Install the Integrated Control Unit (ICU) in the vehicle and bleed the base and Antilock Brake System (ABS) hydraulic systems.
