Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
5. Remove the drive belt (Fig. 10).
6. Carefully return tensioner to its relaxed position.
INSTALLATION
1. Route and position the drive belt onto all pulleys, except for the crankshaft (Fig. 10).
2. Rotate belt tensioner counterclockwise until belt can be installed onto the crankshaft pulley (Fig. 8). Slowly release belt tensioner.
3. Verify belt is properly routed and engaged on all pulleys.
4. Install drive belt shield (Fig. 7) and lower vehicle.