Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Intake Manifold: Service and Repair
Upper Intake Manifold
REMOVAL - 3.3L
1. Disconnect battery negative cable.
2. Disconnect air inlet sensor electrical connector.
3. Remove air inlet resonator to throttle body hose assembly.
4. Remove throttle and speed control cables.
5. Disconnect make-up air hose support clip from throttle cable bracket.
6. Disconnect the Automatic Idle Speed (AIS) motor and Throttle Position Sensor (TPS) wiring connectors from throttle body.
7. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.
8. Disconnect the EGR transducer vacuum hose from bottom of upper intake manifold (Fig. 123).
9. Remove the EGR tube (Fig. 123).
10. Disconnect the vapor purge vacuum hose from throttle body.