Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Front Crankshaft Seal: Service and Repair
REMOVAL
1. Disconnect negative cable from battery.
2. Raise vehicle on hoist. Remove right wheel and inner splash shield.
3. Remove accessory drive belt.
4. Remove crankshaft damper.
5. Position Special Tool 6341A on crankshaft nose. Carefully screw the tool into the seal until it engages firmly (Fig. 62). Be careful not to damage
that crankshaft seal surface of cover.
6. Remove oil seal by turning the forcing screw until the seal disengages from the cover (Fig. 63).
INSTALLATION
