dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blower Motor > < Ambient Temperature Sensor Circuit Test|Page 6468
Page 1
background image

Ambient Temperature Sensor / Switch HVAC: Service and Repair

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Raise and support vehicle on safety stands.
3. From behind front bumper fascia, remove screw holding sensor to radiator closure panel.
4. Remove sensor from vehicle.

INSTALLATION

1. Position the sensor in the vehicle.
2. From behind the front bumper fascia, install the screw holding sensor to radiator closure panel.
3. Connect the battery negative cable.

Blower Motor > < Ambient Temperature Sensor Circuit Test|Page 6468