Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Fig.14 Clutch Plate And Shim(s)
8. Tap the clutch plate lightly with a plastic hammer and remove the clutch plate and shim(s) from the compressor shaft. Be certain not to lose the
shim or shims.
CAUTION: Do not pry between the clutch plate unit and the pulley to remove the clutch plate from the compressor shaft as this may damage the
clutch plate.
Fig.15 Remove Clutch Pulley Snap Ring
9. Using snap ring pliers (Special Tool C-4574 or equivalent), remove the external snap ring that secures the pulley to the front cover of the
compressor, then slide the pulley OFF of the compressor.
10. Remove the screw that secures the clutch coil pigtail wire connector bracket and ground clip to the top of the compressor housing.
