Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
5. Position the knuckle back into the strut clevis bracket. Install a flanged bolt from the service package into the upper mounting hole. Install a cam
bolt into the bottom mounting hole. Both bolts should point forward once installed.
6. Install a dog bone washer on the steering knuckle to strut clevis bracket attaching bolts, then install the nuts onto the bolts from the service
package. Tighten the bolts just enough to hold the steering knuckle in position when adjusting camber, while still allowing the steering knuckle to
move in clevis bracket.
7. Repeat the procedure to the other side strut clevis bracket.
8. Reinstall both front tire and wheel assemblies and tighten to specifications.
9. Lower the vehicle. Jounce the front and rear of vehicle an equal amount of times.
