dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Ignition Switch Lock Cylinder|Service and Repair|Page 3811 > < Crankshaft Position Sensor|Locations|Page 3806
Page 1
background image

Ignition Switch Lock Cylinder: Service and Repair

REMOVAL

1. Disconnect negative cable from battery.

Steering Column Cover

2. Remove steering column cover retaining screws.

Steering Column Shroud Screws

3. Remove screws holding steering column shrouds and remove lower shroud.

Ignition Switch Lock Cylinder|Service and Repair|Page 3811 > < Crankshaft Position Sensor|Locations|Page 3806