Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
Fuel Level Sensor: Service and Repair
REMOVAL
Remove fuel pump module. Refer to Fuel Pump Module.
See: Fuel Delivery and Air Induction/Fuel Pump
Fig. 2 Fuel Pump/Level Sensor Electrical Connector
1. Depress retaining tab and remove the fuel pump/level sensor connector from the BOTTOM of the fuel pump module electrical connector.
NOTE: The pump module harness on TOP of flange is not serviceable or removable.
2. Pull off the locking wedge.
Fig. 3 Wire Terminal Locking Finger
3. Using a small screwdriver lift locking finger away from terminal and push terminal out of connector.