Dodge Workshop Service and Repair Manuals > Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001) > Powertrain Management | Transmission Control Systems | Relays and Modules - Transmission and Drivetrain | Relays and Modules - A/T | Control Module, A/T | Component Information | Service and Repair | Pinion Factor Setting

Transmission Control System Relay, A/T > < Pinion Factor Setting|Page 3919

Page 3

6. Connect battery negative cable.
7. If TCM was replaced, reset Pinion Factor and Quick Learn. (Refer to TRANSMISSION CONTROL MODULE - STANDARD PROCEDURE).
8. If TCM was replaced and vehicle has less than 2,400 km (1500 miles), perform TCC Break-In reset procedure. (Refer to TRANSMISSION

CONTROL MODULE - STANDARD PROCEDURE).

Powertrain Management
Transmission Control Systems
Relays and Modules - Transmission and Drivetrain / Relays and Modules - A/T / Control Module, A/T / Component Information
Service and Repair / Pinion Factor Setting
Page 3920

Transmission Control System Relay, A/T > < Pinion Factor Setting|Page 3919

Dodge Workshop Service and Repair Manuals

Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)

Powertrain Management Transmission Control Systems Relays and Modules - Transmission and Drivetrain / Relays and Modules - A/T / Control Module, A/T / Component Information Service and Repair / Pinion Factor Setting Page 3920

Powertrain Management Transmission Control Systems Relays and Modules - Transmission and Drivetrain / Relays and Modules - A/T / Control Module, A/T / Component Information Service and Repair / Pinion Factor Setting Page 3920

Powertrain Management
Transmission Control Systems
Relays and Modules - Transmission and Drivetrain / Relays and Modules - A/T / Control Module, A/T / Component Information
Service and Repair / Pinion Factor Setting
Page 3920

Powertrain Management
Transmission Control Systems
Relays and Modules - Transmission and Drivetrain / Relays and Modules - A/T / Control Module, A/T / Component Information
Service and Repair / Pinion Factor Setting
Page 3920