Caravan FWD V6-3.3L VIN 3 Flex Fuel (2001)
8.
Allow the paint to dry a minimum of 15 minutes.
9.
Reposition the synchronizing cable over the tether wires (original installed position).
10.
Assemble the cushion and upholstery to the frame (clip on the 6 "J" strips: 4 rear and 2 side).
11.
Install the seat belt buckle anchors. Torque the bolts to 39 Nm (29 ft. lbs.).
12.
Using the procedure outlined on page 23-240 of the 2001 Town & Country, Caravan and Voyager Service Manual (Publication No. 81-370-1005)
and available on MDS2, install the two passenger bench seat back.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
