dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering Gear|Removal|Page 6136 > < Steering Gear|Removal|Page 6134
Page 5
background image

12. Remove both outer tie rods from steering knuckles, using Puller, Special Tool C-3894.

13. Remove the lower control arm rear bushing retainer bolts located on each side of each lower control arm rear bushing.

NOTE: The bolts fastening the cradle crossmember reinforcement are of two different thread sizes. Note the location of the various sizes.

Steering Gear|Removal|Page 6136 > < Steering Gear|Removal|Page 6134