dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Half Shaft Front|Page 4822 > < Half Shaft Front|Page 4820
Page 3
background image

10. Remove nut attaching outer tie rod end to steering knuckle (Fig. 6). Nut is to be removed from tie rod end using the following procedure, hold tie

rod end stud with a socket while loosening and removing nut with a wrench.

11. Remove tie rod end from steering knuckle using Remover, Special Tool MB-991113 (Fig. 7).

Half Shaft Front|Page 4822 > < Half Shaft Front|Page 4820