dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Window Regulator|Service and Repair|Page 2694 > < Turn Signal Switch|Diagrams|Page 2689
Page 1
background image

Window Regulator: Service and Repair

REMOVAL

1. Remove door trim panel and water shield.
2. Remove door glass retaining clips and allow glass to rest on bottom of door.
3. If equipped, disengage wire connector from power window motor.

Front Door Glass Window Lift Guides

4. Loosen screws holding front and rear window lift guides to inner door panel.
5. Separate screw heads on lift guides from key hole slots in inner door panel.
6. Loosen screws holding regulator to inner door panel.

7. Remove regulator from inner door panel.

Window Regulator|Service and Repair|Page 2694 > < Turn Signal Switch|Diagrams|Page 2689