Caravan FWD V6-3.3L VIN R (2001)
Power Door Lock Actuator: Service and Repair
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove sliding door trim panel.
3. Remove sound pad as necessary.
4. Remove latch/lock control cover.
5. Remove latch/lock control.
Sliding Door Lock Motor
6. Remove screws holding door lock motor to latch/lock control.
7. Remove lock motor from control.
INSTALLATION
1. Position the lock motor on the latch/lock.
2. Install the screws retaining the motor to the latch/lock.
3. Install the latch/lock control.
4. Install the latch/lock control cover.
5. Install the sound pad and trim panel to the sliding door.
