Caravan FWD V6-3.3L VIN R (2001)
3. Using a press and a " socket to protect the shaft, install output shaft into rear planetary annulus gear (Fig. 253).
4. Using Tool L-4429-3, install both output shaft bearing cups to transaxle case (Fig. 254) (Fig. 255).
5. Determine output shaft bearing shim thickness. Shim thickness need be determined only if any of the following parts are replaced:
^
Transaxle case
^
Output shaft
^
Rear planetary annulus gear
^
Output shaft gear
^
Rear annulus and output shaft gear bearing cones