Caravan FWD V6-3.3L VIN R (2001)
12. Place crimping tool C-4975-A over bridge of clamp (Fig. 19).
13. Tighten nut on crimping tool C-4975-A until jaws on tool are closed completely together, face to face (Fig. 20).
CAUTION: The boot must not be dimpled, stretched or out of shape in any way. If boot is NOT shaped correctly, equalize pressure in boot and
shape it by hand.
14. Position CV boot into the CV housing retaining groove. Install the boot large diameter retaining clamp evenly onto the boot.
15. Clamp the CV joint boot to the CV joint, using required procedure for type of boot clamp application.
CRIMP TYPE BOOT CLAMP
If seal boot uses crimp type boot clamp, use the following procedure to install the retaining clamp.
