Caravan FWD V6-3.8L VIN L (1999)
Lock Cylinder Switch: Service and Repair
REMOVAL
Negative Battery Cable
1. Disconnect and isolate the battery negative cable.
2. Remove the door trim panel and sound pad.
3. Close the door window.
4. Disconnect the door key cylinder switch wire connector from the door harness and wiring clip from the impact beam.
5. Remove the front door outside handle from the door.
Door Lock Cylinder Switch
6. Disengage the lock tab holding switch to the back of the lock cylinder.
7. Remove the switch from the door handle.
INSTALLATION
For installation, reverse the above procedure.
