Caravan FWD V6-3.8L VIN L (1999)
Transmission Shift Position Indicator Lamp: Testing and Inspection
Electronic Transmission Range Indicator Segment Test
When CHEC-3 is displayed in the odometer window, each segment of the transmission range indicator will illuminate sequentially. If a segment in the
transmission range indicator does not illuminate normally, a problem exists in the display board.
Conditions
Refer to the following tables:
-
Instrument Cluster
-
Speedometer
-
Tachometer
-
Fuel Gauge
-
Temperature Gauge
-
Odometer
-
Electronic Transmission Range Indicator (PRND3L)
-
Mechanical Transmission Range Indicator (PRND21)
for possible/problems/causes and corrections.
Additional diagnostic trouble code information can be found at Body Control Module, Testing and Inspection, Diagnostic Charts. See: Body and
Frame/Body Control Systems/Body Control Module/Testing and Inspection
Please also note that Instrument Panel Calibration can be found at Cluster Diagnostics/Calibration Under Testing and Inspection at the component level.
See: Instrument Cluster / Carrier/Testing and Inspection