dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Headlamp > < Hazard Warning Switch|Diagrams|Page 6893
Page 1
background image

Hazard Warning Switch: Service and Repair

WARNING: BEFORE SERVICING A STEERING COLUMN EQUIPPED WITH AN AIRBAG REFER TO AIR BAGS AND SEAT
BELTS/AIR BAGS FOR PROPER AND SAFE SERVICE PROCEDURES.

REMOVAL
1. Release hood latch and open hood.

Battery Negative Cable

2. Disconnect and isolate battery negative cable.
3. Remove upper and lower steering column shrouds.

Turn Signal Multi-Function Switch

4. Disconnect wire connector from back of turn signal multi-function switch.
5. Remove screws holding turn signal switch to steering column adapter collar.
6. Remove turn signal switch.

INSTALLATION
For installation, reverse the above procedures. Verify switch operation by placing the control stalk in either the right or left position and turning the
steering wheel to ensure the automatic cancellation of the switch.

Headlamp > < Hazard Warning Switch|Diagrams|Page 6893