dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

EVAP System - Leak Detection Pump Misdiagnosis|Page 2966 > < EVAP System - Leak Detection Pump Misdiagnosis|Page 2964
Page 1
background image

Leak Detection Pump: Service and Repair

REMOVAL

Leak Detection Pump

The Leak Detection Pump LDP. is located under the driver's side in the cast cradle under the steering gear.
1.

Raise and support vehicle on a hoist.

Leak Detection Pump Connector Lock

2.

Push locking tab on connector to unlock.

3.

Push down on connector latch and pull connector from pump.

4.

Remove hoses.

5.

Remove bolts holding LDP and bracket to cradle.

6.

Remove bracket from LDP.

INSTALLATION

1. Install LDP to bracket.
2. Install LDP and bracket to cradle. Torque bolts to 9.5-14 Nm (85-125 in. lbs.). Before installing hoses to LDP, make sure they are not cracked or

split. If a hose leaks, it will cause the Check Engine Lamp to illuminate.

3. Install hoses to LDP.

EVAP System - Leak Detection Pump Misdiagnosis|Page 2966 > < EVAP System - Leak Detection Pump Misdiagnosis|Page 2964