Caravan FWD V6-3.8L VIN L (1999)
Ball Joint: Service and Repair
Ball Joint Replacement (Front Suspension)
REMOVE
Ball Joint Seal Boot Removal
1. Using a screw driver or other suitable tool, pry the seal boot off of the ball joint assembly.
Ball Joint Removal From Lower Control Arm
2. Position receiving cup, Special Tool 6758 to support lower control arm when removing ball joint assembly. Install Remover, Special Tool 6919 on
top of the ball joint assembly.
3. Using the arbor press, press the ball joint assembly completely out of the lower control arm.
INSTALL
