Challenger V6-3.5L (2009)
Amplifier: Service and Repair
Amplifier - Installation
INSTALLATION
INSTRUMENT PANEL AMPLIFIER
NOTE: Perform a battery reconnect procedure anytime the battery has been disconnected.See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection .
1. Position the amplifier (2) and secure with the fasteners (1).
2. Connect the electrical connectors.
3. Install the steering column opening cover. See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
4. Connect the negative battery cable
REAR SHELF AMPLIFIER (RC7 sales code)