Challenger V6-3.5L (2009)
Console: Service and Repair
Floor Console - Removal
REMOVAL
1. Apply the parking brake.
2. Turn the ignition switch to the On position, apply the service brakes and place the gear selector lever into the Neutral position.
3. Turn the ignition switch to the Off position and release the service brakes.
4. Disconnect and isolate the battery negative cable.
5. Using a small flat bladed tool or equivalent, separate the retaining ring (1) and slide down the shifter shaft.
6. Pull up on the shifter knob (1) and remove from the shifter shaft (2).