Challenger V6-3.5L (2009)
Door Module: Service and Repair
Door Module - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Position module.
2. Install and tighten mounting fasteners.
3. Connect electrical harness connectors.
4. Install door trim panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim Panel - Installation.
5. Connect battery negative cable.
