Challenger V6-3.5L (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
INSTALLATION
1. From the front of the center bezel (2), carefully push the heated seat switch (1) in through the front of the bezel until both tabs (3) lock into place.
2. Connect the heated seat switch electrical connector.
3. Install the center bezel (2) into the instrument panelSee: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument
Panel Bezel - Installation.
4. Connect the battery negative cable.
5. Verify heated seat operation.
