Challenger V6-3.5L (2009)
4. Align components and install the ABM (1) on the HCU (2).
5. Install the four screws (1) attaching the ABM (2) to the HCU. Tighten the mounting screws to 2 Nm (17 in. lbs.).
6. Attach the mounting bracket to the HCU. Install two mounting bracket attaching screws and tighten to 11 Nm (97 in. lbs.).
7. Install the ICU in the vehicle. See: Removal and Replacement/Integrated Control Unit (ICU) - Installation
Integrated Control Unit (ICU) - Disassembly
DISASSEMBLY
1. Remove two screws attaching the mounting bracket to the HCU. Remove the bracket.