Challenger V6-3.5L (2009)
14. Install the air cleaner body (6) See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body -
Installation
15. Connect the negative battery cable and tighten nut to 5 Nm (45 in. lbs.).
16. Fill the cooling system See: Cooling System/Service and Repair.
17. Operate the engine until it reaches normal operating temperature. Check the cooling system for correct fluid level See: Cooling System/Service
and Repair
Rear Engine Timing Cover(s)
INSTALLATION
1. Clean rear timing belt cover O-ring (1) sealing surfaces and grooves. Lubricate new O-rings with Mopar(R) Dielectric Grease or equivalent to
facilitate assembly.
2. Position NEW O-rings (1) on cover (2).