dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Defroster Duct - Removal|Page 6959 > < Blend Door Actuator - Removal|Page 6954
Page 1
background image

Air Duct: Service and Repair
Defroster Duct - Removal

REMOVAL

WARNING: Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or

service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to
discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the
proper precautions could result in accidental airbag deployment and possible serious or fatal injury.

NOTE: Take the proper precautions to protect the front face of the instrument panel from cosmetic damage.

1. Remove the instrument panel and place it on a workbench See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service

and Repair/Instrument Panel - Removal.

2. Remove the four screws (1) that secure the defroster duct (2) to the top of the HVAC air distribution housing (3) and remove the duct.

Defroster Duct - Removal|Page 6959 > < Blend Door Actuator - Removal|Page 6954