Challenger V6-3.5L (2009)
open-end wrench on shoulder of plastic retainer ring to aid in disconnection.
b. After disconnection, plastic retainer ring (3) will remain with quick-connect fitting (2) connector body.
c. Inspect fitting connector body, plastic retainer ring and fuel system component for damage. Replace as necessary.
17. Latch Clips - Type 1: Depending on vehicle model and engine, 2 different types of safety latch clips are used. Type-1 (4) is tethered to fuel line
and type-2 is not. A special tool will be necessary to disconnect fuel line after latch clip is removed. The latch clip may be used on certain fuel
line/fuel rail connection, or to join fuel lines together.
18. Pry up on latch clip with a screwdriver (3).
19. Slide latch clip toward fuel rail while lifting with screwdriver.
20. Insert fuel line removal tool (1)into fuel line. Use tool to release locking fingers in end of line.
21. With tool (1) still inserted, pull fuel line (2) from fuel rail (3).
22. After disconnection, locking fingers will remain within quick-connect fitting at end of fuel line.
23. Disconnect quick-connect fitting from fuel system component being serviced.
