Challenger V6-3.5L (2009)
Fuel Gauge Sender: Description and Operation
Fuel Pump Module - Description
DESCRIPTION
This vehicle uses a saddle type tank that has a reservoir on both sides of the rear drive shaft. The fuel pump is in the module on the left side of the
vehicle (2) and the fuel pressure regulator is in the module on the right side of vehicle (1). The fuel outlet is on the right side and supplies fuel to the
engine. The fitting on the fuel pump module (left side) is a vapor line fitting that connects to the right side module.
Both modules have fuel level sending cards. There are 2 hoses that connect the modules together, one is the fuel supply line the other is a return or
siphon hose. The lines are removed from the fuel pump module when servicing either unit. The ORVR (Onboard Refueling Vapor Recovery) control
valve is in the right side module.
Left side fuel module with electrical connector (1), vapor fitting (2), and level sensor (3)
