Challenger V6-3.5L (2009)
Air Bag Control Module: Service and Repair
Occupant Restraint Controller - Installation
INSTALLATION
WARNING: Do not install ORC if mounting location is deformed or damaged. This will cause the ORC to be improperly located. Failure to
follow these instructions may result in possible serious or fatal injury.
1. Position the Occupant Restraint Controller (ORC) (2) into the vehicle and install the three mounting screws (1). Tighten the screws to 11 Nm (8 ft.
lbs.).
2. Reposition the sound deadening material (1) around the ORC.
