Challenger V6-3.5L (2009)
Seat Belt Retractor: Service and Repair
Seat Belt Retractor - Removal
REMOVAL
FRONT
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service.
Failure to do so may result in accidental airbag deployment, and serious or fatal injury.
2. Remove the two lower seat belt anchor bolts (1).
3. Remove the lower quarter trim panel. See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Luggage Compartment
Trim/Quarter Trim Panel - Removal
4. Remove the two upper turning loop retaining bolts (1).
