Challenger V6-3.5L (2009)
Power Mirror Switch: Service and Repair
Power Mirror Switch - Installation
INSTALLATION
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. See: Starting and
Charging/Battery/Service and Repair/Procedures/Battery Reconnection .
1. Install the mirror switch (1) to the door trim panel and snap into place.
2. Install the door trim panel.See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Installation.
3. Connect the negative battery cable.