Challenger V6-3.5L (2009)
Power Steering Fluid Reservoir: Service and Repair
Reservoir, Power Steering Pump - Removal
REMOVAL
1. Disconnect and isolate the negative battery cable (2).
2. Siphon the power steering fluid from pump reservoir.
3. Remove the air filter housing and clean air tube to throttle body See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
4. Remove the supply hose (3) retaining clamp at reservoir (2) and disconnect the hose.
5. Remove the return hose (1) retaining clamp at reservoir (2) and disconnect the hose.
6. Remove the reservoir (2) from the coolant bottle (4) by sliding it up and out of the guide.