Challenger V6-3.5L (2009)
2. Install supply hose (3) on pump (1). Install clamp securing hose in place.
3. Install air cleaner housing and inlet tube See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Cleaner Body - Installation.
4. Connect negative battery cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
5. Fill and bleed power steering system. See: Service and Repair/Steering - Power Steering System Bleeding