Challenger V6-3.5L (2009)
REPAIR PROCEDURE - ENHANCE POWER STEERING COOLER
1. Remove the Front Fascia. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under: Service Info > 23 -
Body > Frame and Bumpers > Bumpers > Fascia, Front > Removal.
2. If this vehicle is a:
a. LC proceed to Step # 3
b. LX proceed to Step # 4
3. Remove the Front Air Dam. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under: Service Info > 23 -
Body > 13 - Frame and Bumpers > Bumpers > AIR DAM, Front > Removal.
4. Remove the Belly Pan. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under: Service Info > 23 - Body
> Exterior> BELLY PAN > Removal.
5. Remove the left and right cooler baffles (Fig 1).
NOTE:
LX vehicles only
NOTE:
In the following step do not remove any air conditioning hoses
6. Remove (4) Condenser mount screws and tilt the assembly forward. As shown in DealerCONNECT > TechCONNECT under: Service info > 24 -
Heating and Air Conditioning/Plumbing/CONDENSER, A/C - Removal > Step 10.
7. Remove the power steering return line hose and cooler clamp from the cooler. As shown in DealerCONNECT > TechCONNECT under: Service info
> 24 - Heating and Air Conditioning/Plumbing/CONDENSER, A/C - Removal > Step 5 number 10.
8. Loosen the return line nut at the power steering rack. As shown in DealerCONNECT > TechCONNECT under: Service info > 19 - Steering > Pump
> HOSE, Power Steering, Return > Removal > GEAR 10 COOLER > Step 7.
9. Is this vehicle a SRT:
a. Yes >> Proceed to Step # 11.
b. No >> Proceed to and skip Step # 11.