Challenger V6-3.5L (2009)
19. Install the black protective boots on the old inlet and outlet ports of the power steering cooler and secure them with zip ties as shown in (Fig. 5)
20. Bleed and fill power steering system as required. Refer to the detailed procedures available in DealerCONNECT > TechCONNECT under: Service
Info > 19 - Steering > Standard Procedure > Power Steering System Bleeding.
21. For LX vehicles only: Re-install the cooler baffles on the left and right side (Fig. 1).
22. For LC vehicles only: Install the Front Air Dam. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under:
Service Info > 23 - Body > 13 - Frame and Bumpers > Bumpers > AIR DAM, Front > Installation.
23. Install the Front Fascia. Refer to the detailed removal procedures available in DealerCONNECT > TechCONNECT under: Service Info > 23 - Body
> Frames and Bumpers > Fascia, Front > Installation.
24. Install the Belly pan. Refer to the detailed installation procedures available in DealerCONNECT > TechCONNECT under: Service Info > 23 - Body
> Exterior > BELLY PAN > Installation).
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
